Philips Hue Neon Outdoor Strip Light Review

Introduction

First announced back in September at IFA, alongside the awesome new Hue Bridge Pro, the latest-gen Philips Hue Neon Outdoor Strip Light is a follow-up to the original that was announced at the same tech expo, seven years prior.

Adding Hue’s Gradient lighting and Chromasync tech to the mix, the new Neon Outdoor Strip Light works indoors or out, comes in a range of sizes and can be used without a Hue Bridge if you’re not fully invested in the Hue ecosystem, albeit with some caveats that I’ll get to further down.

It’s expensive, yes – it’s Hue after all, but not eye-wateringly so… but you could get a 10m alternative from Govee for around the same price as the 3m model I had on test for this review.

The good news is that you’ll pay the same for 3m as you previously paid for 2m of the older-gen model.

But is it worth the outlay? Read my full Philips Hue Neon Outdoor Strip Light review to find out.

Design and installation

• Chunky build
• 3m long
• Works with or without a Bridge

The Neon Outdoor Strip Light is thick, heavy, and unapologetically chunky.

At roughly an inch wide and about half an inch thick, it feels more like flexible rubber tubing than a traditional LED strip. You cannot run it discreetly along tight edges or tuck it neatly under trim like Hue’s indoor strips.

The upside of that bulk is durability and diffusion. The individual LEDs are completely hidden beneath the silicone coating, which results in a smooth, continuous glow with no hotspots at all.

It also means the strip can be bent into shapes straight out of the box, though not nearly as precisely as Philips Hue’s promo images suggest. Soft curves and flowing lines are realistic. Sharp points and intricate shapes are not.

The box and promo images show stuff like clouds and moon crescents, but it’s not as easy to manipulate as I’d hoped. There’s no way I could get the points on the moon as sharp as it is on those images.

Mounting is a more permanent affair, too. There is no adhesive backing here. Instead, Signify includes small brackets and screws for wall mounting, which works well but does rule out quick installs and repositioning.

There are also no ground spikes, so if you were hoping to snake it through flower beds or along pathways, you will need to get creative.

The strip itself is properly weatherproof, rated IP67, while the power supply is IP20 and designed to stay sheltered.

Like other Hue outdoor products, it uses the familiar chunky waterproof connectors and the usual oversized plug.

It can be linked up with other Hue outdoor devices, as it’s part of the low voltage plug and play system. It comes with a 30W outdoor power supply but you can use a 40W or 100W power supply that you may already have, to daisy chain multiple outdoor Hue lights.

Setting up the Neon Outdoor Strip Light follows Philips Hue’s familiar, and simple, routine.

As mentioned in the intro, you don’t actually need a Hue Bridge to get it up and running, as you can pair it directly via Bluetooth, which gives access to most of the app’s color and brightness controls.

However, for the full Hue experience – think things like scenes, automations, and Hue Sync features – pairing with a Hue Bridge (original or new Pro) is necessary.

That’s the more likely setup scenario for most, I’d imagine, and setup is straightforward. Just scan the QR code, connect to your Bridge, assign a room or zone, give it a name, and you’re ready in a few minutes.

All modern Hue bulbs can also connect via Zigbee through compatible Amazon smart speakers, including the likes of the 3rd-gen Echo Show 8, Echo Hub, and Echo Show 21. This allows Alexa integration without needing the Hue skill.

If you’re using Home Assistant you can also pair Hue bulbs directly there too, with no need for a Bridge.

However, for the sake of this review I’ll describe the features and performance in the ‘default’ setup, with the Hue Bridge running the show.

Features and performance

• 1100 lumens
• Excellent colour reproduction
• Wide choice of scenes

Brightness tops out at 1100 lumens regardless of whether you buy the 3m, 5m or 10m version. That is lower than the previous generation’s 1650 lumens but, in real-world use, it is still plenty for patios, walls, pergolas and garden features.

Hue’s gradient system works brilliantly here. You can apply linear gradients, mirrored patterns or a scattered mode that distributes colours more organically across the strip. Diffuse mode is particularly effective, blending multiple colours together gently for a soft, atmospheric look that feels effortless.

Chromasync technology does exactly what it promises, keeping colours consistent along the entire length of the strip with no odd shifts or mismatched tones.

Whites are especially impressive, ranging from warm and cosy to crisp, almost clinical cool tones, while still retaining access to the full RGB palette for more expressive scenes.

Hue’s ever-improving scene gallery is another highlight. Effects like coloured fireplace and glisten look fantastic outdoors, and the gradient support means they feel far more alive than on older Hue strips.

Combined with dynamic effects, the strip can even switch off individual segments, adding a sense of movement and depth that standard light strips simply cannot match.

Scenes, automations, syncing and Matter bridging all depend on pairing with a Hue Bridge.

Once connected, it behaves like any other Hue light, working happily with Alexa, Google Assistant, HomeKit, SmartThings and more. It is not a native Matter or Thread device, but bridging through the Hue Bridge works without fuss.

Should you buy it?

FAQs