How To Deep Clean Your iPhone Safely – BGR

iPhones go everywhere. They’re always in our pockets, on kitchen counters, and every now and then, they end up in a bathroom somewhere. So, wiping your iPhone on your shirt and calling it a day may not be enough. Occasionally, iPhones need a real, thorough clean. It’s important to get into all the nooks and crannies and remove grime from ports and speakers that may have built up over time. An iPhone collects more germs than a toilet seat, and it’s important to disinfect it from time to time. Cleaning the smudges from the screen isn’t enough. Just think about how many times a day it’s in your hands and against your face.

That said, cleaning the iPhone isn’t just about hygiene. Dirt and debris can even interfere with how the device works. The speakers can get clogged and produce muffled sound, or the charging port can simply refuse to connect due to built-up dust and grime. Deep-cleaning your iPhone should help with such problems. The good news is, you don’t need to take your device to a service center or an Apple Store to be properly cleaned. You can do it at home by following a few simple steps.

You’ll need to unplug all cables and accessories and power off your device. If it’s in a case, you’ll want to take that off too. Both your iPhone and its case need cleaning, but they need to be cleaned separately. The hero of your cleaning toolkit is a simple microfiber cloth. If you don’t have one, you can use any gentle, lint-free cloth, such as the one for cleaning glasses or camera lenses. The material is gentle enough not to scratch the screen or damage the coating of your iPhone, but effective enough to remove dust, grime, and oils. Most dirt can be removed with a dry cloth, but if you need to remove persistent smudges or disinfect your device, consider dampening the cloth with water or, even better, 70% isopropyl alcohol.

Never spray or pour liquid directly on your iPhone, as liquid can easily damage the device if it sneaks into any ports and small crevices. Also, avoid using any strong cleaning chemicals, such as window cleaners, bleach, or abrasive cloths and paper towels. These can damage your phone’s screen and protective coatings. If you’re using a silicone or plastic case, you can easily wash that as well with some warm, soapy water. Rinse after washing and leave it to dry completely before putting it back on your iPhone. If you’re rocking a leather case, it will need more attention. Cleaning leather depends on how it was treated, so it’s best to refer to the manufacturer’s instructions.

The ports and speaker grilles on your iPhone are magnets for dust, lint, and pocket debris. Over time, the build-up can muffle the sound or cause issues like frequent disconnections or overheating when charging. Cleaning them requires a little bit more patience and the right tools. Start by using a dry, soft-bristle brush. Think of the softest toothbrush or a small brush designed for cleaning electronics. Gently brush around the Lightning or USB-C port, speakers, and microphone grilles to dislodge any loose debris. Don’t scrub too hard or poke around. For more stubborn dirt, you can use a wooden or a plastic toothpick, but be gentle.

Also, avoid using metallic objects such as a paperclip or a SIM card ejector, since metal can easily damage the internal components. Take your time with this step. You ideally want to remove all the grime, as even the smallest buildup of dirt can affect how your iPhone functions. While it might be tempting to use a can of compressed air to remove stubborn debris, the blast can force the debris deeper into the device’s ports and speaker grilles. The stream of pressurized air can also damage the delicate components of your phone. So, it’s important to stick to the safe methods mentioned in this article to keep your iPhone free from dust, dirt, and grime.