Once again this winter, the snow is coming down with authority, and when this nor’easter winds down later today, there’ll be a new accumulation of 12 inches or more. By this time next week, we’re expecting at least another foot on top of that.
As a native New Englander, I’m prepared. We have shovels, sand and a guy who comes to plow our long driveway. But what really captures my attention is overhead. In winter, I’m obsessed with my roof — and with a simple tool that’s become an indispensable ally in maintaining my house properly during cold weather.
My roof rake.
Watch this: Keep Your House at This Temperature to Save Money
It’s not much to look at. Sixteen feet of aluminum pole with a perpendicular 22-inch-wide blue plastic blade at one end. But it makes all the difference in keeping melting snow from turning into streams of water that leak into the house. That’ll damage walls, ceilings, light fixtures and anything else that’s under the drip, drip, drip. Over time, it could develop into a mold problem.
Inside your house, leak detectors are handy gadgets for all kinds of water mishaps, but prevention is always the better policy.
If you live in an area that’s in the path of snowy winter weather, pay attention to the buildup on your roof. In one sense, snow on the roof is a positive thing. It indicates that you have sufficient insulation in your ceiling and attic to prevent warm air from escaping, as well as proper ventilation to help keep the roof cool.
But that snow will melt, producing runoff that heads downhill to your eaves and gutters. And that’s where the problem begins.
The winter of 2015 was a brutal one in Massachusetts, with roughly 90 inches of snow falling in less than a month. That year, the ice dams won.
As that water reaches the edge of your roof, it becomes more exposed to cold temperatures and it’ll refreeze, creating ice dams. Those frozen blockages will build up and prevent the next waves of meltwater from falling harmlessly off your roof. Where does that water go? It backs up under your shingles and through the roof decking, following a new gravitational pathway into your living spaces.
I have witnessed this leaking. I have repaired the damage. I have vowed never to let it happen again.
Which is why I’m outside right after every snowfall, raking away.
There aren’t any really compelling technological fixes for this problem. There is no Roomba for your rooftop. Whole-roof heating systems do exist, but they cost thousands of dollars and are a significant construction project. Here in New England, it’s common to see homes with a heating cable snaked along the lower portion of the roof, just above the eaves. But for my house, even that more modest option would likely run somewhere between $1,000 and $2,000 to install.
With any heating system, there’ll also be ongoing electricity costs and a potentially messy cycle of melting and refreezing.
A roof rake will set you back less than $200, and probably not even half that much. It’s low tech, and it works.
Watch this: I Drove an EV This Winter in Sweden to Prove It Could Be Done.
The right way to use a roof rake
I’ve been using my roof rake after every snowstorm, even the minor ones, for many a snowy winter here in central Massachusetts.
I had to learn the hard way. Before I bought my roof rake, I went after the ice dams themselves, after they’d already become way too thick, and water was dripping, sometimes fiercely, into the house. I was outside on a ladder, in the cold, whaling away with a hatchet. Not the way to go.
This is me, clearing the roof after a refreshingly light snowfall.
A roof rake is so much quicker and simpler — and again, it’s that all-important ounce of prevention. You stand on the ground, reach up with the rake and pull a big shovel’s worth of snow off the roof. Take a step or two and repeat the process. With light to moderate snowfall, I’ll get around my house in about 20 minutes. With heavy, icy accumulation, it takes me about twice that long.
Be aware that it can be a workout for your arms and shoulders. The rake doesn’t weigh much, but it is top-heavy, and you’re reaching up and away from your body. When the snow is thick, wet, crusty or all of the above, you’ll have to make an extra effort with each stroke.
But if you’re familiar with the often backbreaking work of shoveling snow, you’ll welcome the change of pace.
How much snow do you have to pull down? The guides I’ve read recommend clearing as much as 6 feet up from the eaves, and when I started raking my roof, I used to go just as far as I could reach. If I wasn’t hitting that 6-foot mark, I was getting close.
Over time, though, I’ve found that just 1 to 2 feet is generally sufficient. That’s the critical area, right past the eaves, where freezing and ice dam buildup take place.
The guides also advise going easy when scraping down to the roof shingles, so you don’t wear them out prematurely. I have to confess I’m not that fastidious — I’m usually dragging right along the shingles themselves, rather than trying to leave a thin coating of snow — and it hasn’t seemed to be a problem.
And for heaven’s sake, be mindful of where the power lines come into your house. You’re waving a metal pole in the air, after all.
Remember to wear heavy gloves when you’re roof-raking. The aluminum pole gets really cold to the touch.
How to shop for a roof rake
Like leaf rakes, roof rakes don’t have a lot of variety. A typical roof rake comes with four 4-foot lengths of aluminum pole that you attach end to end to get the full length, plus the short blade attachment. (Mine has three 5-foot lengths, along with the blade segment.) The width of the blade ranges between approximately 17 and 24 inches.
The 16-foot length I have is enough for my house, a raised ranch, even on the side where the ground slopes away and I can get just the first foot or so of snow at the edge of the roof. If you have a taller house or you really want to clear way up high, you could always get additional sections. The blade section of my pole angles toward the roof, which is helpful.
Some rakes have little wheels on the bottom of the blade to avoid scraping directly on the shingles. Seems like a smart design.
Other roof rakes aren’t actually rakes at all. Instead of having a blade, the business end is open, with prongs holding one end of a plastic slide that runs parallel to the pole. You push into the snow, and the slide provides a slick runway for the snow to fall to the ground. I’ve never tried one of these, but having spent enough time wielding a standard roof rake, I have my doubts. It seems best suited for powder.
Prices for roof rakes typically range from $50 to $60 and can get to about $200. Years back, I bought a very basic model, and it’s still going strong — an excellent investment.
Gone are the days when I actually went up onto my roof and tried shoveling in addition to raking. In fairness, that was a legendary winter. In 2015, New England experienced four major snowstorms in less than a month, dumping about 90 inches of snow during that short span. No one could keep up.
But short of another “Snowmaggedon,” I know my roof rake will continue to serve me well. Whenever a snowstorm wanes, the two of us will head outside to start the clearing.
